Mitsubishi WS-65613 65" Rear Projection HDTV "screen off" Questions

screen off, clean your mirror and lenses since they will be easily accessible.. windex will do the job well, just make sure not to leave a bunch of lint from paper towels! I'M A 30 YR SERVICE TECH. ON

...screen. Does anyone know how to take it off? Pop the bottom front cover off (that is over the speakers) first. This will expose 2 brackets that hold the moulding around the screen in place. Un-screw ...

...screen cover pops off to get the bug out? The speaker cover just pulls off, there are 4 screws holding the screen on, take them out and the screen should lift off. But be careful, there are wires ...

the TV Menu options when screen turns off. ... After turning the TV OFF then back ON again, the screen will flicker and then ... 1:26. Samsung LEDTV Repair - T-Con Board Replacement - No Picture on ..

...screen off and clean it? YES! remove the top back panal screws (be carefull the mirror is connected to the panal! do not drop!) now wipe off and clean the three glass lenses inside..also wile your in ...

off once you reached screen take it out and split it in half clean it with dry rag then put everything back together exactly the way u took it off before you screw the screen back clean the projectors

...off the screen if you remove backing you can reach in and up if your small enuff and clean without taking it off but if you want to take i suggest getting another pair of hands or 2 and while their ...

...screen assembly. With them off you should be able to slide the screen assembly up about 1-2 inches and take off. This model does have auto convergence so the screen may have wires hooked to the back. ...

screen off to clean it on the other side.. I can see cobwebs hanging in the inside. can u help me CRT Rear-Projection - Before you can begin cleaning, you need to determine if you do, or do not have a

...either but it felt more life it when the screen click off. the screen should turn off and the tv should be "off", if the screen is still on check the settings and make sure standby is not