Mitsubishi WD-62327 62" Rear Projection HDTV-Ready Television "lamp not working" Questions

...lamp for $114. TV is working just fine now! I have the same problem Pop and the tv picture was gone. It could be the lamp so I am calling a tech this morning to come and look at it. Will let you know ...

newlamp went out in 20 days. lamp light blinks. is lamp dead now? tv worked for 2 years, picture went out. replaced lamp from ''bluestar-online'' put lamp in, turned on, worked for 3 weeks, then mid ...

...on nothing comes on only hear the volume and screen just pitch black? Did you recently replace the lamp? If you did then it might be the new lamp. I mistakenly bought an aftermarket lamp to replace ...

...Lamp is good. My WD-62525 was working fine. Went to change channels with remote and picture went out, audio stayed on. Lamp light went to continuous amber. Turned set off. Turned back on and status ...

mitisbuski 73737 made popping sound and cut off Check your lamp. The popping sound was most likely the arc tube exploding. Make sure you only install a real Philips or Osram lamp. WD73737 Mitsubishi ...

lamp light just blinks yellow after lamp replacement, tv does not turn on I will recommend to take the lamp out and slide in again, it might be that your TV havent detect that there is a new lamp. By ...

working perfect. Unit powers on and works properly for a while then shuts off with a red lamp LED (lamp error). Suspect bad lamp part # 915P020010 2. Lamp enable line at J14 pin 6 does not switch to 5

...just sets an makes a clicking noise like it is going to come on and will not. The red light under lamp is on. Sounds like you need a new lamp. Try re-seating the lamp first. If that does not work ...

...works, but no picture. It was on and then the picture went black. Can it be fixed? Probably a bad lamp. This is the first thing I would try....especially if the lamp has not been re[placed in

...lamp installed still isn't working. Checked DC power to lamp (results Dead). Checked DC power input to Lamp circuit board (good). Seems like there is another low voltage connection to mini circuit ...