Question about Mitsubishi WD Televison & Video
...green for about a minute when the TV is plugged back in indicating that it is rebooting. After the TV reboots, the power LED will go out and it should work normally. If the lamp LED shows solid red, ...
Question about Mitsubishi WD Televison & Video
...red for about 2 seconds. Then, the lamp light flashes green for about 1 minutes (This I assume is the TV cooling off per the manual). Finally, the TV turns back on and the picture is excellent. That ...
Question about Mitsubishi WD Televison & Video
...green blinking timer light as usual. Once the light turns off I manually boot the TV with the bypass switch and hear the second fan start up but the lamp will not turn on and the lamp light on the ...
Question about Mitsubishi WD Televison & Video
...green light and the caps are bulging you have other components that have failed and need replaced as well. If the bulged caps do fix the problem it will only be for a short time and will fail again. ...
green "Lamp" light comes on for approx 60 sec; it goes out and a steady red "Lamp" light comes on and stays on. I measured the voltages on the power supply board at connector PA and got 5V at pins 1 &
...red then green, then this might mean that the metal pin that looks like a roofing nail is not making contact with the metal clip. Remove screws, reset panel in place and turn on, the red power button ...
Question about Akai Televison & Video
...green and red. Detach those from the old board, andmark the wires so that you may connect the correct the wires to the newboard. You then unscrew the only screw connecting the board to the TV,and ...
Question about Akai Televison & Video
...green and red. Detach those from the old board, and mark the wires so that you may connect the correct the wires to the new board. You then unscrew the only screw connecting the board to the TV,and ...
...green timer light is constantly flashing quickly and the tv will not respond to me pressing the power button. Good Day, remicarlson; This is not the easiest problem to solve. I will give some ways to ...
...green and red. Detach those from the old board, and mark the wires so that you may connect the correct the wires to the new board. You then unscrew the only screw connecting the board to the TV,and ...
142 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions