Mitsubishi WD-52327 52" Rear Projection HDTV-Ready Television "dlp tv red line top" Questions

...TV unplugged for 1/2 not sure how long it will last but will enjoy as long as it works. Others might want to give this a try before spending hundres of dollars that may not be necessary. Mike, The ...

...DLP 52525 for 2+ years now and recently the green timer light started to rapidly blink when the unit was turned on and it continued to blink without the picture coming on. After discconnecting the ...

DLP TV pix, other times nothing but blue amd green lines left to right amd top to bottom. PLEASE help if u can I lost my job due to a work injury and can not afford to buy a new tv. Thanks, God Bless,

...TV. Thanks for responding; I was afraid that would be the advice! We're looking at the Sony KDS-60A200 or the Mitsubishi WD-65732 to replace it. If anyone has any thoughts on those two models, please ...

tv picture convergence problems.If u have some machanicals skills,like taking things aparts and put it back together again.Try website like Tvrepairworld.com to buy a whole refurbish convergence board

...DLP tv and it does not have a bulb. It is a CRT rear projection tv and it has 3 CRTs that act as light sources and project the image. Since you say that you have lines on the screen, this is most ...

...DLP. Mine had aways been a lemon, great picture, too many shop calls. Get an extended warranty if possible. I'll replace mine with a LCD this year, not a SONY because of the expierence with this and ...

...TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, ...

...TV there are 3 bulbs full of special liquid red blue green 1. What is wrong with the video. A: Vertical deflection system has failed. The repair usually involves replacing the vertical output module. ...

...tv is not a DLP the problem is in the convergence, try to adjust it using your original remote control go to the setting menu then to the convergence section. Adjust the red and blue convergence. you ...