Mitsubishi WD-52525 52" Rear Projection HDTV "tv dm short detected" Questions

Ad

TV is switched Off, the code automatically resets to "12" No Error. Pressing the front panel "DEVICE" and "MENU" buttons at the same time, and holding for 5 seconds, activates the Error Code Mode. The

Ad

Question about Mitsubishi WD Televison & Video

1 Answer

dm board still getting the non stop led if i boot up with no power to fmt board, it will boot up and stop flashing, so i know the issue is on the fmt all fuses are ok, no more bad caps i see any ideas

Ad

Question about Mitsubishi WD Televison & Video

2 Answers

...TV has flashing green light. Tried all resets and power from the wall and no change. Here's something that might also be useful. After you turn on the set, and get the regular red blinky lights, hold ...

Question about Mitsubishi WD Televison & Video

1 Answer

...tv. Thanks for your help and hope to get it up and running again. Replace the 7 caps and checked all fuses. Still comes on and goes off in 30 sec. If someone out there figures out my simptions let me ...

Question about Mitsubishi WD Televison & Video

29 Answers

...TV is ready to go. Suspect the DM PCB part # 934C116002 By the time you get the flashing green light and the caps are bulging you have other components that have failed and need replaced as well. If ...

tv is turned on and nothing happens. Error is 5 pause 9 repeat, after pressing menu and input buttons Chassis V33. Says DM board short detected (error 59). Could be power short on DM, or communication

Question about Mitsubishi Televison & Video

1 Answer

...= Normal - DM μPC is booting up Fast Blink (doesn't stop) After AC is applied = TV μPC is running, but DM failed to boot up Slow Blink Set is Off = Normal - Timer is set for Automatic Turn ...

Question about Televison & Video

1 Answer

...DM short detected" Hi, I own a WD 52631 DLP TV. After turning the TV on, 5 minutes after it turns off and I get the error code 59 and the red light steady. During those 5 minutes I can see picture on ...

...DM board in the back of my TV there a wires that connect to alot of different parts and I sure dont want to make this problem worse by breaking something This model is equipped with a self-diagnosis ...

Question about Televison & Video

2 Answers

...TV is playing. 34(1) (Lamp failure) (Lamp Enable signal from engine is lost) 35 DM fan failed. (73'' only) 36 Lamp ballast fan failed. 37 Engine (DLP) fan failed. 38 Lamp temperature abnormally high. ...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

1,606 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...