Mitsubishi WD-52525 52" Rear Projection HDTV "pa" Questions

"PA" plug Having the same problem as napatoy (I recently changed about 10 capacitors, but I'm having problems with plugging in the correct wires. I labeled everything, but I can't seem to find a wire ...

...all bad caps on my wd-52525. during reassembly i ni=oticed a connection on the DM board marked "PA" i looked all over for a wire that connects to it with no luck. can someone tell me if this ...

...be solid red if the lamp were out. The steady blinking green led is usually caused by failed capacitors on the DM board. You can get the V26 dm repair kit from www.tvrepairworld.com which should ...

...however I figured I had come this far and I would just as soon replace all twelve 1000 uFs as the parts cost $0.23 and I really never want to have to do this again. If I had to bet, the two 10V ...

..."Lamp" light comes on and stays on. I measured the voltages on the power supply board at connector PA and got 5V at pins 1 & 2, and 10.7V (not 12V) at pin 4. All indicators are that the new lamp is ...

i have a panasonic plasma th-42px60 tv for about a year and a half now when i changed the fuse in the plug the power led light is flashing but there is no picture Panasonic shows multiple board ...

address of wish ko lang GUSTO KO PONG MAKUHA ANG ADDRESS NG WISH KO LANG PARA MAIPADALA KO ANG AKING LIHAM SA WISH KO LANG. MARAMING SALAMAT PO. NAGMAMAHAL, CECILE SINGSON ano po b ang address ng GMA ...

rca tv unable to turn tv on after hitting PA LOCK ihave rca tv 52 inch sam taimes ded no tr on en sam taimes oq

purchased an akai42 model PA,after 6 months a water line burst inside my home. it flooded my home inside, the water got into the television. the technician said he could only repair it if he gets new ...

my panasonic 42 plasma won't switch on red led light flashes 10 times then pauses before flashing again 10 times and so on I would say you have problem with pboard or PA board (10 blinks means unit ...