Mitsubishi WD-52525 52" Rear Projection HDTV "lamp red" Questions

red - replaced lamp and light turned red again. Got another lamp thinking maybe the new lamp was a defect. However, after receiving yet another lamp I am still getting the lamp indicator light red. No

...RED LAMP LIGHT ON AFTER REPLACEMENT I had a blue screen with static in middle of screen, message at bottom said component cables were invalid?? I went and replaced lamp twice, because i had red lamp ...

Red "lamp" light stays on Red "lamp" light stays on and screen will not light up. Red light indicates the lamp has failed to light. You may just need to buy a new lamp. If that does not help

...red lamp light was on and I replaced the lamp. the red lamp light came back on after replacing with a new lamp. Could there be another problem Yes the capacvitors on the power board can cause the red ...

red lamp button replaced bulb still wont turn on trys to come on then turns off then red lamp buuton comes on Is all of your Fans running CK lamp fan if it stops running then lamp will not Light also ...

Lamp Light Red - No Screen Image When we turned on the TV, the lamp light turned on a constant red. The lamp light never even flashed green with a warning. The screen was black and there was no image ...

...out (indicator goes to constant red status). Replace lamp (get lamp P/N from User Manual for replacement), clean any dirt around lamp, fan, and rear filter. Do NOT get any fingerprints on new

...red lamp light I just replaced my housing and lamp for a WD-62327 and after replacing and turning the TV on, the red lamp light came on. Last time I replaced the lamp I did it wrong and my girlfriend ...

...Red Lamp indicator. The lamp turns on and off twice then the Lamp indicator turns solid red. I replaced the lamp but it didn't fix the problem. Check your Ballast. bad caps on the power pcb should be ...

...lamp the red lamp light remains on. Lamp will come on for a second then go out. About a minute later the red lamp light comes on and unit shuts off. Check the lamp door to make sure it is seated ...