Mitsubishi WD-52525 52" Rear Projection HDTV "lamp cartridge" Questions

...Lamp Cartridge Turn off TV power a 1. nd allow the lamp to cool for at least one hour before proceeding. 2. After the lamp has cooled, remove the cover of the lamp compartment, located on the back of ...

...lamp cartridge until they disengage from the mating threads. These are captive screws and cannot be separated from the lamp cartridge. 4. Fully open up the bag supplied with the replacement lamp and ...

lamp cartridge in place. Carefully remove the new lamp cartridge from the bag (use a glove to avoid getting oils from your skin on the lamp) and set aside the bag. Pull the old lamp cartridge straight

...lamp cartridge, part number 915P020010, call (800) 553-7278. To replace the lamp, you need a Phillips screwdriver. Turn the television off and unplug the AC cord. Remove the front speaker grill by ...

...Lamp-Cartridge" blew.If your TV remains under warranty, you'll want to call Mitsubishi at 1-800-553-7278, and you'll need to have (a) Mitsubishi Model number, (b) serial number, (c) TV ...

lamp or cartridge on line. Replacing the Lamp Cartridge Tool needed: Phillips screwdriver 1. Turn the television off and unplug the AC cord. 2. Remove the front speaker grill by gently pulling on each

...it with the cartridge also Original lamp comes in cartridge, longer lasting and easy to replace Bulb that replaced in old lamp cartridge is low cast thing and does not work longer. Choice is

lamp cartridge. Otherwise, the lamp warning message will reappear sooner than necessary. After you change the lamp cartridge, you must reset the lamp reminder through the TV Setup menu Go to the setup

...lamp cartridge. I am not a complete idiot. I was able to remve the cartridge from the wd-52327. Can someone tell me how to remove the lamp. I don't want to mess up the cartridge. Thanks in advance, ...

...lamp cartridge is typically loosened by unscrewing two screws. After that, the whole lamp assemblt just pulls out. Replace by doing things in reverse with a new lamp. Do some research on getting the ...