Mitsubishi WD-52525 52" Rear Projection HDTV "fios tv" Questions

...tell them to check it again 4. if you have HDMI use that instead of the scart connections. I hope you have luck with Verizon Fios there internet rules but there TV service is sub par! Thanks ...

Mitsubishi WD52525 getting Banding and scrambled picture. FIOS is not the problem, other other TV's work on the signal. Problem was sudden. could be the Analog tuner going bad!

...tv or the signal and how do I fix it? Thank you. Check in your instruction manual to see if the set can actually work in 1080i. Most of the sets going back about 4 to 6 years ago were not capable of ...

fios & Ps3 ) the screen is BLANK - no input menus - nothing. You get it over to the analog cable, and it all works as expected. (you can see the input menus as normal) So -what the heck is going on???

...represented by the # it changed the ratio and the message went away. I usually only use the fios remote to turn the tv on and off but this must be some whacky override that comes from the fios

...FIOS, anyway check that out, the TV itself, I do NOT think is faulty, check connections, antenna and to TV as well. Unplug ALL from wall wait 5 mins, and power back up, this often fixes a lot or ...

...Fios. All of our other TV's are hooked up to Verizon Fios, and we are not having the problem with them. If you hold the menu and input buttons on the front of the tv down at the same time for approx. ...

...TV or is it a goner? It ended up being the Verizon Fios box. We recycled it and the picture stopped rolling. Thank you for being here to help. If I have any future questions, I'll definitely use your ...

...tv ln40a530p1fxza so that I can control it with the FIOS remote. go to google and type in universal remote codes for flos remote and you will get a site to get you those codes, you can also try www. ...

...FIOS box and the TV. When we changed to HDMI cables so we can get the high def, then the tv works beautifully for about 20 seconds before the entire screen goes to green. We can still hear the audio ...