Mitsubishi WD-52525 52" Rear Projection HDTV "52327 turns" Questions

Buzzing noise from Mitsubishi DLP WD-52327 after replacing bulb Light came on for bulb replacement I've replaced twice in the past. Replaced bulb as before now won't turn on get buzzing noise. Getting

......

wd-52327 The inputs 1,2,3 will not work. the component hook up works fine Make sure the 1,2, and 3 inputs are enabled in the settings. You can turn the inputs on and off so you don't have to go ...

Mitsubishi WD-52327 Picture flickers and goes blue I have a strange issue with my Mitsubishi WD-52327 rear projection TV. After 15 - 60 minutes of use, the picture flickers and goes to a solid blue ...

...52327 The TV turns on, lamp fires up for 10 seconds and after blue flash on the screen TV turns off (green blinking shut down light) --- then lamp light goes red. TV can be turned back on and follows ...

WD-52327 Red Light Problem I Have been reading about the Red Light Problems and Light Engines on the Mitsubishi WD-52327 TV's. I have a new light and replaced it. and the tv did not want to start up. ...

I have the WD-52327 52in rear projection and the problem I'm having is that. Frequently now when I turn the tv on there are several lines going vertically down the length of the screen. It'll remain ...

recently my wd-52327 said it needed new bulb(steady orange light). i had replaced the bulb 7 months earlier and didn't want to see the light so i reset the lamp timer. well the bulb blew the next time

...52327. The TV turns on and stays on for 30 sec to 3 minutes. Then the TV shuts off, no picture, no audio and status indicator flashes red 3 short times and then one long red flash and then the ...

Solid yellow lamp light AND flashing yellow status light TV won't turn on and has both a solid yellow lamp light and a flashing yellow status light. Diagnosis anyone? start with the lamp.