Mitsubishi WD-52525 52" Rear Projection HDTV "52327 lamp replacement" Questions

...52327 has the V26 signal board or what signal board my tv has? Did your replace lamp come on the screen or did you lose picture? Just because the LED indicator suggest replace lamp it doesn't mean it ...

...lamp located? Here is a link to the owners manual for lamp cartridge replacement. Specifically go to page 65 for instructions. Good Luck : ) ...

...wd-52327. Can someone tell me how to remove the lamp. I don't want to mess up the cartridge. Thanks in advance, Danny Try this, it includes a Youtube video ...

...52327 The TV turns on, lamp fires up for 10 seconds and after blue flash on the screen TV turns off (green blinking shut down light) --- then lamp light goes red. TV can be turned back on and follows ...

...52327 or just the bulb? You can do either, it's your choice. A lamp only replacement will save you a bit of money, but the installation will take just a little while longer. You will need to remove ...

52327 said it needed new bulb(steady orange light). i had replaced the bulb 7 months earlier and didn't want to see the light so i reset the lamp timer. well the bulb blew the next time i turned it on

...52327. The TV turns on and stays on for 30 sec to 3 minutes. Then the TV shuts off, no picture, no audio and status indicator flashes red 3 short times and then one long red flash and then the ...

...lamp burned out on my Mitsubishi DLP television (WD-52327) which I have replaced. When I turn the tv back on, the lamp light indicator is a solid yellow and I never get a picture. When the tv shuts ...

sound no picture turn tv on solid green light no picture. video blue screen all home menus come up. sound works fine just no picture If you replaced TV lamp recently then check lamp cover and make ...

...52327 Lamp hour indicator. I had a technician come and replace my lamp and he was able to check how many hours I had on the lamp. But he wouldn't tell me the service code. I know he pressed the menu ...