Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television "tv picture bent" Questions

Ad

tv that the red and green isn't showing. We replaced the dlp chip and since then we are looking at brown trees and blue lips. Can you help us with this issue? sounds like the color wheel is bad Hello,

Ad

...picture/no sound/then red light comes on as tv shuts itself off. Reset did not help. Turn on the set and let it shut down. push in the Menu and Device (or input, I don't have a schematic in front of ...

Ad

Question about Mitsubishi WD Televison & Video

1 Answer

tv is, a friend gave it to us over a year ago for free (can't beat that). At the time it worked fine, it still looks great too! About a month ago the set started blinking until we turned it off. After

Question about Panasonic Televison & Video

1 Answer

...too.These parts on the tv convergence board,must be replaced to repair the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and

Question about JVC Televison & Video

1 Answer

...tv. It shook wildly the when the picture came back the picture is bent. When looking inside the tv the green and red are being projected bent at the top and bottom. Please help. Thanks Beth You need ...

Question about RCA Televison & Video

1 Answer

RAINBOW EFFECT, NO PICTURE Rainbow effect, no picture. T.V. was turned off with no problems, but when it was turned back on there was bent lines , no picture. Bent lines?????????????

...TV - Picture bent and seeing multiple colors When I turned on my TV last night, Sony KP-46WT520, the picture was bent inwards on the top and the bottom, and a little bit on the sides. Also, I was ...

Question about RCA Televison & Video

1 Answer

...picture is bent. color is a bit fuzzy and 3 lines appear at top of screen. rca r52wh74 Ur convergence it dead,know how to solder?Buy a convergence kit use what in that kit.Tries websites Tv Repair ...

Question about Philips Televison & Video

1 Answer

...tv and the top and bottom of the picture are bent and the colors are off... HELP? What can I do? Ur convergence it dead.U know how to solders?Buy a convergence kit use what in that kit.Tries these ...

Question about Panasonic Televison & Video

1 Answer

picture is bent, color convergence is mis aligned. Check convergence in setup an it is on target except to look like some one sightly twisted the color so none of the lines can end up overlapping each

Not finding what you are looking for?
Mitsubishi WD-62725 62" Rear Projection HDTV-Ready Television Logo

281 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1255 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...