Mitsubishi WD-62525 62" Rear Projection HDTV "dlp tv error codes" Questions

...DLP TV BLINKS RED 4 TIMES AND YELLOW 2 TIMES? I think this is a DLP tv and has a special fan deep inside the works. I think, not sure, but you can google around to find more information that error ...

DLP HDTV. Error Code Probable Cause 12 No error detected 22 Recovery from momentary Reset 32 Lamp Cover open 33 Air Filter Cover open 34 Lamp abnormality 35 Chassis Fan failure 36 Exhaust (Back Cover)

DLP will not turn on. I tried to turn it on last night and the tv seemed to power up but no picture was present. I tried to reset, and the same thing happened. I examined the lamp and it appeared fine

...dlp tv error codes sound no picture replaced the bulb I get a code of 6 blinking red and 1 blinking yellow If you wish to get more details, check this site. Pull up older posts there. Check the site ...

...dlp chip. no getting error code 12. tv turns on, no picture, do have sound. fan on the dlp chip is no starting right away. Go back and make sure you do not have any loose or missing cables

red statis light these sets have a specific blink or error code, it is also possible to call up a error code even if set does not come on.

...dlp wd-65638 with error code 61. What is this error code? How do I fix? no picture or audio. factory reset. if the power LED is flashing green then there is a circuit or board that either has a blown ...

...DLP TV. the bulb is new but i am still getting error code 34... my question is if i change the ballast (part number 939P978020) will this fix my error code and allow my set to turn on? p.s. set turns ...

...tv turns off and will not come back on, I performed the code analysis and got 3 blinks pause hen 3 more blinks what does this code signify? hanks Rita Moreno,LPN the 33 error code is indicating the ...

...searched online for any way to produce the error codes to no avail.HELP? Press menu and input on front of TV for 5 seconds. Green light will flash two digit code 5 times. '12' is no error(no