Mitsubishi WD-62525 62" Rear Projection HDTV "apart" Questions

Mitsubishi 52725 caps issue Have tv apart. I am going to replace electro caps. Which surface mount caps need to be replaced on the FMT brd. thanks, jason email: [email protected] all 47uf, all 220 ...

...light won't stop you have a bad dm module, it's about $800 just for the part. you could take it apart and try changing the big 1000 micrfarad at 16v capacitors on the dm board, but this almost ...

...was locked in properly with the screw on the side but now all I get is a black screen, I've had it apart 5 or 6 times. All of the screws are in place, all wires are connected. The lamp worked before ...

lamp the lamp ballast fuse is burn out Black or just sagged apart? If the latter, I would try a new fuse and see what happens...accordianman

...to pull the DLP chip out & clean the dust & foreign particles that got in while you had it

...in, it actually pushed the connector out the back of the housing. I will have to completely take apart the TV to repair

...over again. Did we do something wrong when replacing the bulb or cleaning the filter? We took back apart and everything is secure.....please help...Super Bowl coming up. :-) do this. press and hold ...

30 ish white lines on screen Hi,i have a sagem 56" dlp tv,recently about 30 white lines about 1" apart have appeared on the screen.These lines are not permanent some times lasting for 2hrs other times

...mitsibishi tv and created a black spot in the lower left hand corner. How can i fix this? Take it apart and clean the dried water spots off. Its hard to say if it will work but that's the first ...

...on these TV's  some capacitors fail and "pop" on the DM board, You will have to take it apart and re-cap the caps on the DM board 1000uf 10v (4 - 7 of them). This solves the problem in ...