Mitsubishi VS-45609 TV "turn repeatedly comes" Questions

...turn on the set, the standby light should blink for a a while then stop once the picture comes on. If a problem is detected internally, the standby light should blink in a repeated pattern. Please ...

Does not turn on at all, but when plugged in it makes a repeated makes a repeated clicking sound coming from the back when it is plugged in. You have what we call a line fault , means your power ...

turn it on When the power light comes on and then goes out, on the front of the set press both the MENU and INPUT buttons at the same time and hold them both in for at least 5 seconds and then release

...minutes the picture disappears. It comes back on for 1 - 2 minutes then repeats. When set if first turned on, the stereo/stand-by light (red) flashes on/off until just before picture first appears. ...

...turn it off. I had to unplug. I plug back in it comes on and turns off in less than 10 seconds and turns itself back on and repeats the cycle. I've replaced the lamp but nothing. make sure put the ...

TV makes a reoeated cricket sound & won't turn on. As the TV was on, it just turned off all by itself and then started to make this repeated cricket like sound. The TV won't turn back on by either ...

comes over but no pictures.any suggestions please? you have to turn the screen control up a bit.there are 2 conrols on the flyback transformer,top one is focas bottom one is screen,turn it up 1/8 turn

Thomson 28WH403S keeps going into standby My tv keeps turning itself off (to standby) then 1 of 3 things happen: 1) the red light flashes then the set sometimes comes back on or; 2) the red light ...

turn it on the green light comes on then it turns off then it turns on it repeats its self These are called blinking codes. From the number of blinks, you can get an idea about which section inside is

...off it will not turn back on. Repeatedly pushing the on button worked for a while but now it comes on for a couple of seconds then shuts down. please change the vertical ic if the on off button is ...