Mitsubishi CS-27205 TV "auto channel search philips" Questions

picture till you get to channel 7 then you get same program after you change the channel after that. go to menu programmed and choose auto search then press it.pls wait until the searching will finish

...helpful. In the menu of the Philips dual unit,select set-up then look for channel auto-program instructions. Be sure to hook-up a tv channel signal source before beginning auto-search.Hope this

...please, or where to get a user manual you can put remote in auto tunning or automatic search mode,it will tune automatically. for user manual see web site www.eserviceinfo.com or philips ...

...you need to put the tv on channel 3 or 4 or an input mode if you are cable direct you need to access the TV's menu and do an auto channel search after making sure it is set to cable not ...

...auto program. This will allow the set to search for all available channels. There is also a possibility that when you hooked it up the little wire center conductor in the cable might have been bent ...

auto or manual tuning on Philips powervisiov television I want to search for channels but I cannot get to search menu Most of these TV's were designed to primarily be programed with the remote control

...for about 10 seconds, then plug it back in, also try an auto search. If all fails it might be a bad tuner or microprocessor IC for the IF tuner section. This would require a trip to a local TV

channel. I bought the one-for-all (model URC-7711) universal remote which worked with this model TV. I don't know the code, but I have found that if you purchase the Philips SRU 1018/10 11 (for about