Mitsubishi WS-65819 TV "power button direct know" Questions

...power button down for a long time (several seconds) finally, the light indicator on the remote will light up beside "TV" and the set will turn on. I have replaced the batteries and gotten the exact ...

...power button does not switch the 110V directly. The circuit could be either be a relay or solid state switch that turns on the main power supply. It sounds like you have a problem with that circuit ...

power button. Normally the red power button would turn blue and show the Prima logo as the TV turns on. But the red power light would just blink red and the Picture/TV ill not turn on. Could this be a

button on the side of your tv. It will be by the power, channel and volume buttons. Direct TV should have instructions for programming your remote to operate your TV. You may have to try several codes

...power button, have a random RCA universal remote, how do i tune it to work for the TV? Two things you can do:GOOGLE THE NUMBER OR MODEL OF THE REMOTE AND LOOK FOR THE INSTRUCTIONS FOR PROGRAMMING ...

...power switch [NOT BY REMOTE CONTROL HANDSET], each time before trying a new code. Proceedings Direct Code EntryPress and hold the SETUP button until the red indicator stays on, then release the SETUP ...

...power, do the following: 1. Press the Menu button on the remote. 2. Arrow up / down to SET LOCK CODE The lock icom will appear 3. Arrow left / right to operate 4. Press 0 to access the lock code 5. ...

...power button for about 15 seconds, the unit should power down by itself after you have powered it on. If it does not, then do not be concerned. Let me know if the problem continues. The first link ...

...power button lights up and it clicks, but that's all. No picture, no sound, nothing. The next day i tried and it worked fine again, it worked fine for a few days. 5 days later when i turned it on all ...

...power to turn it off?  If channel is constantly moving in one direction( up or down) the micro=switch under that specific button is bad--it would have to be disconnected to know for