Question about Konica Minolta Office Equipment & Supplies
...exposure lamp fails to come on, on start up the main exposure lamp should come on and do a scan. If the lamp is not detected by the sensor, then you get the code. Restart the machine, watch for the ...
...seconds than it goes off, Than I got ERROR F5-02, Thank you. "F5-02 : Exposure lamp blown" check scanner flat cable,exposure lamp,exposure lamp section,i hope it should be change flat
Question about Minolta Office Equipment & Supplies
...exposure lamp timing wrong I have an old Minolta EP 2030 CS Pro copier with 2 paper trays, automatic document feeder, sorter and no duplex. It recently gave me an error code of C0410. I was able to ...
Question about Sharp Office Equipment & Supplies
...Exposure lamp blown **ALWAYS DISCONNECT POWER BEFOE WORKING ON MACHINE**** Check the exposure lamp, if defective replace. Check inline exposure lamp fuse, if defective replace. Also check flat cable ...
...exposure lamp has failed or the circuit that powers it has failed. The exposure lamp is the light that comes on from under the glass and scans your original. Most likely failure is the exposure lamp ...
Question about Minolta Office Equipment & Supplies
exposure lamp is coming on place a sheet on the glass press start and see if the exposure lamp comes on and stays on as it copies if it does not come on then you need to check the lamp and the scanner
Question about Copystar Office Equipment & Supplies
exposure lamp or thermo fuse for exposure lamp. Stii have problem ? let me know. On my copier the exposure would light when I made copies but come to find out it wasn't bright enough. Look at the lamp
c0400 dialta 470 REplace the exposure lamp and board, The exposure lamp is the Lamp on the big glass, raise the doc feeder press start to make a copy does the very bright light come on
Question about Office Equipment & Supplies
...Exposure lamp malfunction. C0410 Exposure lamp thermistor malfunction. Verify the exposure lamp continuity and the thermistor continuity.To reset error code open the copier and press the reset ...
...Exposure lamp header failure. The exposure lamp is the bright light under the big sheet of glass the comes on to make a copy. Raise the Document feeder and press the start button does the bright ligt ...
116 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions