Mitsubishi WS-55807 TV "fluid tech" Questions

...tech or person with some TV knowledge. Okay, let's start over: 1. To reset the TV unplug tha ac cord from the wall for 3-4 minutes.... plug back into wall. 2. On the front the TV behind the speaker ...

fluid is sprayed or spilled onto the top or front of the TV and it seeps down inside and contaminates the little pushbuttons. If the volume down pushbutton is contaminated, the set will have the exact

...fluid in it, the set will just sit there searching for channels and will not respond to any other commands. The computer thinks you are pushing the channel button and responds accordingly. When you ...

...fluid in and around it then it can conduct and the microprocessor thinks you are telling it to go up through the channels. The only way to fix that would be to disassemble the set and pull out the PC ...

...advise you to NOT buy philips fluid as the **** they sell will become cloudy again (I use RCA cause it works and it`s cheap) good luck if you attempt it, I would advise you to calll a tech, ...

...fluid dripped down onto the board where the pushbuttons are. The pushbuttons them became contaminated and shorted out inside. Usually, the damage done will not be reversed by drying the set out. He ...