Mitsubishi WS-55807 TV "crt circuit board pics" Questions

...is dropped the printed circuit board gets cracked, the only way to tell is to remove the back and printed circuit board and check; if not too badly damaged can be 'hard wired' across breaks and ...

...circuit board with all the plugs in it? If you have a pic of the board can you please send it to me at [email protected]? Thanks disconnect CRT broad from neck of picture tube if high voltage ...

...needs a special equipment like the color pattern generator. u cannot just adjust this manually. try to inspect the crt circuit board see if there is an open resistor there. u have a luminance ...

...crt tv 14" .. my problem is that when I turn on my t.v Its works fine and I can see pic but there is no tv station sound although silent mode is not activated and spekers are on but I can listen some ...

PICTURE AND SOUND KEEP GOING OUT AND COME BACK FOR 30 SECONDS TV TURNS ON PIC AND SOUND FINE THEN PIC AND SOUND ON FOR 30 SEC AND OFF FOR 30 JUST KEEPS GOING BACK AND FORTH. TRIED USING DRY AIR TO ...

...circuit board. I opened it up (remove 8-10 screws and don't forget the 2 little ones holding the coax/cable connection), gently vacuumed off the circuit boards (the bottom one and the one on the back ...

...circuit board, It is probably round the switching transformer section or the eht section but please be aware of the very high voltages stored in the capacitors and tube. If you need any more help ...

circuit board is cracked or a part on the board is broken. You can determine this by visual inspection, although you may need to use a magnifying glass if you have tiny surface-mount parts stuck right

my 32 c0by tft tv turns on but there is no pic or sound. what do i do? Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service ...

Picture blinks then gets lighter then darker Most visible when no lights are on - blinks brighter then blinks darker Good Day, freden899; Your 2000 unit may be experiencing fluid on the PCB's (printed