Ricoh Aficio 450 Copier "repair polygon motor" Questions

...repair sc202 ? and panel is dead.have repl lazor unit and psu and bicu Hi, This is Polygon mirror motor problem. 1. Try to turn the main switch off and on. 2. Check the wires. 3. Check the polygon ...

check the polygon motor operation. Check connector and harness connection. Replace LSU. You have a defective laser unit. If you could find a used laser unit, only then would it be economical to repair

...repair? or is machine too old to bother? C4000 Polygon motor synchronization problem The polygon motor does not reach the stable speed within 15 s of the START signal turning on. Poor contact in the ...

polygon mirror motor Polygonal motor is inside the laser unit. You need a technician to repair this.

polygon motor Error code L6-10 the polygon motor is situated inside the LSU (Laser unit) and can only be repaired by a qualified Sharp printer technician , because the machine has to be entirely ...

...POLYGON MOTOR ERROR??? I OWN AN OFFICE REPAIR COMPANY, THIS ERROR IS A NEW ONE!! Yes this is a Polygon Mirror motor error it is reasonably common in the Lanier digitals. The mirror motor can be ...

on if the error code comes back the parts will probably have to be replaced I repaired the polygon motor just by putting oil in it, so I didn't have to replace any part. Try it before replacing parts

...polygon mirror in the laser unit is not spinning. I have never seen this error caused by anything other than a bad laser unit. I would strongly recommend contacting a certified repair technician to ...

...polygon motor failure I am in Alaska and can not get the machine to a repair person at a reasonable cost. I am getting a message that reads "unit 11 laser polygon motor failure" then it scrolls ...

polygon motor failure is referring to the Laser Unit (part# - 116-1110-00). This issue somewhat common on the Xerox 7700. Unfortunately the laser unit must be replaced and is pretty expensive (around