Ricoh Aficio 450 Copier "printer printing left side" Questions

...on the panel (Refer user manual for more details) IM USING MEDICAL SOFTWARE WITH EPSON LX 300+ PRINTER WHEN I PRINT THE BILS IT PRINTS LEFT SIDE ONLY ON ROLLING PAPER BEFORE IT WAS WORKING

...printer not printing fully in the left column new cartridges are in but printer doesn't want to print on left side of paper-very lightly-rest of page is fine. Is the print quality poor on left side ...

...printer will nor work you can try to pull manually the print head in left side to see if there are any plastic parts in the right side. but be carefully and don`t force to much. Usually it have to ...

...printing i checked and replace head and ribbon but problem still same so kindly help me regarding this mater. Regards M Gohar Sharif Verify your LCD Display Print Width setting is set wider than your ...

card not printing When we print the card the left hand side doesn't print completely-----about 3 mm worth. You should be able to adjust printing edges in the printer properties, or have you tried that

...printing right side is dark print and left side of the paper is very light plz help me Try to remove toner cartridge and shake, plug in and make a self test print. if not work, you need to change new ...

...printer prints only the left side Kodak Easyshare printer prints only the first inch of space along the left side. The printed edge fades and the rest of the picture is blank. did you ever get it ...

...left side of the page where the printing is blurry/missing parts. Example: I try to print a solid sheet of just black and I will have a somewhat spotty white stripe (about 1/2 inch thick) down the ...

...printer, but less Color printing. The result is there are always enough toner on the 3 color rollers, but the black toner is lean on the black roller. When this gets worse, the left side of the black ...

...printing on left hand side in Excel and on Internet, Word is fine. Install new drivers from Xerox site and reset printer manuals I had a similar problem with another model. I went on line to the Co. ...