switch. The sensor for the fuser door is located on the High Voltage Power Supply (Part# - WH773). All of the door sensors are attached to this. ItemInc.com has this item and ships same day. Replacing
...fuser door. So, I pushed on it where it made the mechanical switch and the printer hummed to life and the message went away. I took the fuser out and examined it. The metal brackets where the pivot ...
Question about Ricoh Office Equipment & Supplies
...of small rubber exit rollers, this switch (between middle and left) can get damaged it also likely that a piece of paper is concertinaed in fuser. pic of rear of fuser and exit switch in red ...
...areas. Check all doors are shut. pic of rear of fuser and exit switch in red circle thanks so much. it worked!!! this solution should be posted in the regular instructions!!!!!! you were most
...fuser and shut the covers. Failing this there is a push switch that is activated when the front door and left hand door is shut. Sometimes the screw holding the cover on comes loose and causes the ...
fuser back in, and same message. Any ideas? There is a switch that should "close" when the door closes. But, that switch either is damaged, or it is not sending the "now closed" signal to the printer.
...the fuser seems in place you need to replace the High Voltage Power Supply. The fuser door switch is part of the High voltage power supply. Replacing the HVPS should fix this right up. Hope it
Question about Samsung Office Equipment & Supplies
door sensors, and removed and replaced the fuser again. No success. Have noticed that there is a crack in the fuser cam shaft. Any help will be gratefully received! Reinstall software. You do not have
...switch is above the right side of the fuser when looking at the fuser straight on. you can see the **** on the plastic cover that covers the connectors of the fusers. make sure that the ...
...still showing fuser door is open will not print or copy That is a problem with the fuser door switch which is a part of the High voltage power supply. Replacing the HVPS should fix this right
487 questions posted
Usually answered in minutes!
629 Questions
267 Questions
215 Questions
218 Questions
230 Questions
