Ricoh Aficio 1035 Copier "blurred copies" Questions

...have a Cannon IR 1600. If we place a copy under the "lid" vertically, the last two inches of it are blurred. Any suggestions? The quality is fine if the document is placed horizontally or through the ...

...Copy machine Canon 6650 II When you say Blur? Is it a scattering of toner or is the whole image blurred or out of focus? You may have a problem with the lens HP or a problem with the scanning ...

...copies and prints are blurred with shadows When I print anything out (or copy also) the page is blurred with shadows from the words on the page. How do I fix this? That was the Solution that the ink ...

...i had the same problem. IT turned out being that the LSU glass had come slightly unglued and fell back into the machine what caused all the copies to be skewed and blurred. I'd give that a go

...blurred copies usually stem from a deteriated opc(drum) to eliminate the optics, run prints directly, a management list is best, turn sub switch off, press/hold 3and6 while turning machine back on, ...

Blurred section on copies. I Have a Sharp AL-1631 and it is 5 years old. A third of the page on the copies (long ways) has started coming out blurred/fuzzy- like you need glasses. I just put new toner

blurred color images on 2 sided color copies made on 80# cover stock 11 x 17 the colors sometimes are not alligned properly on top of each other (making a blurred image) one side comes out clear and ...

...copies come out crooked on the paper and the letter are blurred, no service codes on the display screen, no paper jams, just the grinding noise and a small earthquake each time we press copy We are ...

when i copied its blurred? i have already clean the mirror still there is part that is blurred Are you sure your printer toner is OK or not you must be replace this toner if you refill it.Because ...

...blurred copies usually come from the optics area, when turned off and on does the zoom lens go to home position and back? did you clean the optics and then had this problem, could be a misaligned ...