...address bar of the web browser, type http://192.168.2.1. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit. Click on "MAC Address ...
...Address bar and enter your router's IP address then press [Enter]. NOTE: If you are using Mac to access the router's web-based setup page, following these directions: Mac Step A: Open a web browser ...
...Address bar and enter your router's IP address then press [Enter]. NOTE: If you are using Mac to access the router's web-based setup page, following these directions: Mac Step A: Open a web browser ...
...address bar where you type http. Let's make sure to clear it out, type there the default Ip address of the router 192.168.1.1 and press enter.> Username and password appears. By default, leave the ...
...address bar. 7 Log in with your admin account.Routers are protected with an admin login and password. Check your router's documentation or look up the model online to find the default login ...
...address bar and type in this IP address: 192.168.1.1 or the full address: http://192.168.1.1 This is the default IP address for the router set by Linksys. 2 Hit the Enter key on your keyboard to ...
Question about Linksys Computers & Internet
...address bar. You will then be prompted to enter the current (or default) username and password for the router. After you have successfully logged in, you should be able to navigate to the appropriate ...
Question about Linksys Computers & Internet
...Address bar and type in the router's IP Address and click on the Go button (192.168.1.1 is the default IP address of Linksys Routers). 3. A window will appear prompting for a ?User Name? and a ...
...address bar) and click on the wireless tab! If you had mac filter enabled or forgot the password you might experience difficulty, in that case you can reset the router! (If you forgot the ip of the ...
address bar. The default IP address is 192.168.1.1. At the LOGIN, click LOGIN and click on Advanced Setup. 2.Click on WAN and then click Dynamic IP on the left hand side, then select Dynamic IP (Cable
516 questions posted
Usually answered in minutes!
1,179 Questions
1,053 Questions
455 Questions
409 Questions
369 Questions