Linksys E3000 Wireless Router "solid ethernet light" Questions

...- Solid or flashing quickly when data is being transferred. Ethernet - Only on and flashing quickly if cable attached to it and an active device Wifi - Solid or flashing with active data ...

solid green. Ethernet = When lit, this light indicates that the modem is communicating with your computer. This will be on only if you're using the Ethernet cable to connect the modem to your computer

...solid green and the ethernet led's all flash gren every few seconds This is a sin of a bad unit already, first thin that you can try here is to reset the router by pressing the reset button of the ...

solid or blinking green. It indicates a good connection and correct wiring. If the light is off, check the Ethernet wire's connection between your modem and router. May be it can be cause of Incorrect

solid (or go amber), but it does come on and stay on. I have NOT tried to connect the wireless router via an Ethernet cable (to access either the net or the router's config. intranet page), NOR have I

...Ethernet cables. For one, the light is solid green, whereas the light for my laptop is flashing orange/red. I can still surf the internet, though my connection is laggy on occasion. Solutions? s: ...

...Solid power light and ethernet show. Visual inspection of board seems fine. Is it time to shop for another? If so, what model would be the best? Thanks in advance. Rich Solid power light indicates ...

solid. Is that right? The upper light blinking means that the connection to your ISP is not working. Try unplugging/replugging the Ethernet cable in the top port (probably yellow and labeled "WAN" or

...solid green 2) Connect an ethernet cable from the router (any of the wired ports)to the computerIf it says media disconnected, Try with a different cable, Different port in the routerIf ...

...solid, not blinking) and all four ethernet port lights, despite nothing connected to any of them. Have gone through power cycle several times. Have tried restoring to factory settings. All to no ...