Orion 2500D Car Audio Amplifier "amp stays protect" Questions

amp up and give it power it stays in protect mode. The most common reason an amplifier goes into or remains in protect mode is shorted output transistors. To eliminate other possible reasons for it to

protect light remains on, the amp likely has blown output transistors. hey i have a 800 watt crunch amp..and i was listening to it and the sound left and the power led and protection led was lit..so i

...amp if the protect light stays on or is it the wiring? It could be the wiring. Sony amps will go into protection if the ohm is to low. They usually like to see 4 ohm or higher. Unplug your speaker ...

stays on disconnect all the speakers from it.. turn it off and then on again, if the protection light is still on your amp has gone out and id take it to a pro to get it fixed. you might be better off

amp staying in protection mode Brand new xta880 wont stay on - the protection circuit light comes on as soon as the amp does, then goes off and doesn't come back on until I reset the remote/head unit.

...amp has a protect circut, both amps are pretty old and the fosgate amp doesnt have a protect light but the other amp does and everytime i turn the stereo on the light comes on im not sure exactly ...

...amp stays in protection mode hi, im running 2x jvc subs(1000watts each) and amp Dream Audio (1800watts 4channel) was playing my sound on hot day and it just cut and the amp went into protection mode. ...

...amp protect mode stays on i have a lanzar vibe 800 watt amp. It has recently gone into protect mode, what does this mean? And it stays there. Is it blown, or do I need to do some thing? My Speakers ...

...amp the red protect light stays on and it wont let my amp work and when you take out the fuses the red light goes off If the protection LED lights only after the remote voltage is applied (head unit ...

...stays in protection, the amp is faulty. Have it repaired or replace it. Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you ...