Orion 076D0FH020 Remote Control "dish network light stays" Questions

...If the light stays on and you have already replaced the batteries, then the remote needs to be replaced. Please call 1-800-333-3474 and speak with Tech Support. I hope this helps. Ray Calo DISH ...

...DISH Network. I apologize about your remote control not working properly it will be my pleasure on helping you with this issue. When the red light stays on it normally means that the remote control ...

dish network remaote all lights are going on at top of remote and staying lit. Than all will shut off. Remate does not function. Thank you You need a new remote as yours is defective. Thanks for using

...light dish remote "sat" button light stays on, cannot use any other function, replaced batteries and same happened, after about 2 minutes light went out on "sat" button and now no ...

Dish network Hopper remote. Can anyone help? Don't go and search for IR codes as you'll waste your time. Use the learning method. Take your bose remote and put it on a flat surface and point it toward

...light gets stuck. any suggestions? You can check the obvious like ensuring all batteries are oriented correctly or a new set of batteries but when you are done you will more than likely still need a ...

dish network or Expressvu remote. 1)Make sure your TV and Satellite Receiver is ON. 2)Press and hold TV button until all lights on the side of it flashes. The TV button is the second button on the Top

...light stays on, not the button) and wont let me change channel or do anything i have a remote that says on the back 155679 The easiest solution if you have tried new batteries is to request a ...

...DISH Network Customer Service here. I would be happy to help with any remote issues you're experiencing. Normally if the remote is stuck on VCR mode you would need to try replacing the batteries ...

...light stays lit but no functionality.new batts, still nothing. reset DVR, still nothing beavs72, If the Sat button stays lite with no function to control the receiver, either the Sat button is stuck ...