Sennheiser MM 450 Wireless Bluetooth Stereo Headset "fix pairing problems" Questions

fix i use 1. delete the pairing on your mobile phone. 2. switch on the headset then hold the on switch in the pairing position for about 7 sec. which should put it in pairing mode. 3. do a search with

fix it... if ur headset is paired with ur phone, remove it (from the 4ne) the try to pair the two again even thought the jabra is not responding. put the switch into pair mode and hold it there. (make

...you step by step instructions on codes, pairing etc I had the same problem and the above advice fixed it. BlueAnt needs to add this information to their standard pairing information to their ...

Thanks I haven't heard of this before. Turn off it off and remove the pairing from your phone. Turn it back on and pair it up again. Make sure you enter the passcode (usually 0000). That should fix it

...fix it? Thanks. Try charging it for 24 hours, this should reset the headset. then completely delete the pairing and repair the device. If this doesn't work, there could be a problem with the mic ...

...is Sony Ericsson Satio U1i with Symbian OS. vsidharth I had the same problem with my satio.. i fixed it,what to do is pair your bh-503 then click on auto connect.. now click on bh-503 a menu

...fix I figured out follows. Shut off your blue tooth device. hold down the on button untill the light emmits a solid blue light. Try pairing your device with your phone. Use pass code 0000 key 0000 ...

...fix it. My phone does show the bluetooth symbol as if it's working. I had the same problem with my Razor and the H700. I removed the device from the phone and reinstalled and that fixed the pairing ...

...fix this annoying problem. When I first paired it to my phone it worked perfect. My husband tried to pair it to his phone (without reading instructions)and while I was on my phone, so I'm thinking he ...

...into pairing mode and threw away my instruction manual. What I did to fix it is I smacked it against my hand by the three buttons and it went into pairing mode. Do at your own risk but worked for