Recoton Advent Advent HT3251A TV "power off" Questions

...power off by power button. Hold the remote in one hand (you'll need it later), and with the other hand maintain "volume " and "input" buttons on the TV, and press the power button. Maintain the power ...

...Power off LED, the LED is off, power on, led blinks on and off with no other sounds or actions. I unplugged the unit, waited 30 seconds, plugged back in, turn on, Power LED goes On, the relays click, ...

power turn-on after 5min.s cut off power sometime power cord take off and then put on TV power normality work and then cut off again. please , how i do? chek for leakage capacitors.hope thisn will ...

off power light. TV was playing with good picture and sound but began shutting off intermittently and now will not get picture or sound at all. I have RCA model; tv cuts on but no picture and no sound

...power off with the remote or the button on the front of the TV, the picture tube will sometimes stay brightly lit and not turn off. By turning the power off/on a few times the picture tube may turn ...

...off and on it a bad power button and down volume bad. and i still cuts on and off so i removed the power button thinking i can turn it off and on with the remote, that didn't work neither. this kind ...

...power off to our house for a minute and the television was on. When he turn the power on the TV started turning on and off rapidly. There isn't any picture or sound. Just on and off over and over. We ...

...power led turns off. I hear the main fan. but after I turn of the TV, the power light goes off, and the 2 smaller fans cycle on / off. Any suggestions? Hi, this is a faulty power board. i would ...

...power on/off. Hope this helps. I had the same problem. I'm sure it was the the small safety interlock switch behind the access door for changing the lamp. Some people taped the tape in place, but if ...

...power went off, did you ever turn the tv off by unplugging it?? In other words, did you turn the power off completely to the set or leaving it in standby?? if you always left it in stby, it will be ...