...putting the saw blade the wire hooked end came unattached to the guard and now there is no tension of the guard. how can i fix this I need to know the make and model of your saw in order to help
Question about Saws
...also have to be removed and then you should be able to lift the blade guard off the saw. The spring will hook around the blade guard and the other end will hook to the saw housing. Hope this
...saw blade and guard to install a 7-inch concrete blade due to insufficient clearance after removing original saw blade. Having removed the concrete blade after completing the work, I am not sure how ...
...saw blade rubs on the guard I have a new circular saw and tried putting the blade on it. It rubs on the plastic guard. There doesn't seems to be a way to move the guard away from the blade and when ...
...blade guard Do I need to remove or reolace the blade guard Hard to say without seeing it but....wrong sized blade, bent blade, clamp missing or installed wrong, bent guard, or bent blade shaft. I'd ...
blade guard back in place when you're done sawing ... can't seem to figure out where the spring is supposed to lie within the saw. Any help out there? Thanks there is a hold in the lower guard for the
...saw. The spring that pulls the guard back has stretched and broken lose. I have no idea where the spring attaches to the guard. One end is attaced to the motor side of the housing. Any ideas? Thanks. ...
...saw There is an upper (fixed) blade guard and a lower (moving) blade guard which has the added complication of being connected to a linkage or mechanism to swivel the guard away from the workpiece as ...
saw blade? Am I correct that this is a hand-held saw? Want to make sure of the terminology. If so, the bolt holding the blade has right hand threads -- meaning it loosens by turning counter-clockwise.
1 questions posted
Usually answered in minutes!
1 Questions
