power outage. To restore it, I need the remote and the VCR is not responding. I've tried programming a different remote but still nada. Is the part in the vcr that receives the remote signal a
...responding to remote control or manual commands try a power on reboot. hold the power button for 12 seconds until it reads "recover" Rolling picture could be a loose cable or TV on the wrong
...power swith on and the remote does not respond - new batteries. With it stuck on "hello" it means there is likely a blown capacitor in your machine. I had the same problem. Replaced the faulty ...
Question about Toshiba Televison & Video
Remote control "enter" will not respond in DVD mode My remote control "enter" button will not respond during DVD mode. It works fine in all other mode. I had the same problem. Powering down and ...
My DVD PLayer is flashing LOAD. I just powered it off; however when it powers up the load light resumes flashing. The DVD player will not respond to the remote control. The buttons on the front of the
...power button together the player will go off. put it on again the remote should work. If you have changed the command mode on your recorder and now find the remote no longer works. Make sure you have ...
Question about Philips Televison & Video
responds, you have successfully programmed your Philips universal remote. 6. If not, turn the device off and back on and follow the steps again using the next code on the list. Repeat until the device
remote for 5-7 secs to see if it responds. If that fails, change batteries, and repeat process. If that fails, I would get a new remote from RCA and/or store. If replacement fails, then the remote led
Question about iLO Televison & Video
remote and press the power button; if the device responds go to step 87. If the device doesn't respond, press the CH ^ key until the device turns off8. Press SET to store the codeRemember that not
Question about Televison & Video
...line 1 when you use remote. Sometimes it wont respond or even power up. What do i do. Its fairly new. If it is under warrantee, bring it back or send it back...it's not for you to mess around
14 questions posted
Usually answered in minutes!
35 Questions
29 Questions
5 Questions
19 Questions
13 Questions