Yamaha AX-396 Amplifier "remote clean" Questions

...clean the output panel of the remote with a damp cloth and the same to the front panel glass you may be lucky. Just Damp please not dripping in water!!!!! If ypu keep the amplifier system very clean ...

1 inch range on remote I have been using my amp for only two weeks and last night it just decided that the range of the remote (one that came with receiver) is only extending out one inch. All the ...

...check battery terminals are clean and not had caroded batteries inside. not much more you can do if none of the buttons work but change the remote, you can probably get one on the internet , ...

i have yamaha rav312 remote but its volume buttons are not working rest of them are working fine. i cleaned it from in side but result is still same. Try this advice: ...

Need remote control replacement for a KLH Rec/Amp kl2400 I have a very old but good working KLH stereo receiver/amplifier. The remote control has just stopped working. I've cleaned it and checked ...

...work properly. Can this be fixed? If it worked previous then probably not. Sometimes you can clean the buttons with Servisol. But often when a remote goes it's better and cheaper to buy a new

...remote control batteries being new & the amp sensor lens clean the amp won't power up my tuner when I turn it on.Works when I use the control amp power switch.What part is bad & is it ...

...clean it by air blower. 3-if you use remote control to power it keep it far away and all other remotes also. 4-disconnect all your speakers---- and try to test the amp one by one.until you find the ...

.....using contact cleaner. However big POP from speakers when turn on power OR when selecting main or remote speakers after power up. Thanks; Alan look for any cold solder or component terminal lose ...

...clean and distortion channels,6 EQ settings with remote footswitch and boost channel). i think it may be Musician class, but am not sure--have it set to 21V, but really want to know what the factory ...