Yamaha DSP-AX1 10-Channel Amplifier "impedance selector" Questions

the main output terminal of ur power amp. do not connect speakers on the woofer ouput. make sure u are using the right impedance speakers. do not switch speaker impedance selector while the unit is on

...impedance selector switch and verify that it is set to the proper position according to your speakers' impedance. It has to be all the way up or down, never in the middle. (Warning: Do not move the ...

...selector with volume control for 4 speaker pairs. This will take the left and right speaker wire out from your amplifier and distribute it to 4 pairs of speakers. Each pair of speakers gets it own ...

...Impedance Selector in between settings Generally speaking, an amp protects itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on. Overloads can be from ...

impedance which is available even inkit form and can be fitted on to your system. The preamp output can be shared into the input of the source selector maybe with a switch and you willl be able to fix

...impedance or resistance number that very low? Scottymac and to all. Power transformer for power amplifier are high current. resistance on both primary and sec are surely very low, one can think its ...

...impedance for the amp. They should be 8 Ohm. Connect them to the Speakers A sockets on the back of the amp. Set the Speaker selector switch on the amp's front to Speaker A Connect your source as ...

...selector and out to 4 pair of 8 ohm 100 watt rated speakers. The amp has begun switching into the standby mode after playing for 45 minutes(roughly) and more frequently after that. Is the amp ...