Yamaha P-2500 Amplifier "clip light" Questions

...CLIP lights remain on. The clipping light is a warning when volume is set to high you get advanced notice the amp is about to go critical, now if everything is fine in the sound department it ...

the clip light stand still and there is no sound from that side If you disconnect the input on that side , does it still clip? How far up is the input level when it clips? Thanks

...Clip Light and Static ? The clip light is always on weather anything is plugged in and it there is a lot of static on the output ? I know its not the microphone generating the static because it ...

...clip light still on? if so then I'm afraid it sounds like the output devices for one channel may have blown, ( not certain, without looking at it i'm afraid ). If you need more help, then please ask. ...

...CLIP LIGHTS STAY ON. COULDN'T LOCATE A CIRCUIT DIAGRAM. CHECKED INTERNALLY FOR LOOSE CONNECTIONS AND SHORTS,ETC. I am also having a similar problem. I am using a classic 1985-87?? reciever. I dont ...

...clip lights do not light (yet), when this occurs. Doesn't seem like the variable speed fan is increasing properly but vent air temperature does not seem excessively high (only warm) either. No air ...

...the clip light on channel B the clip light (red) stays on. channel A is fine, but no music is playing to the speaker at a lower volume. That side of the amplifier has a failure. It requires

Why are the clip lights always on, and no output signal? The clip lights measure the INPUT signal to the amp. Try lowering that level .

the clip light turn on with low music, what the wrong with that? it could be you are missing 1 side of the supply which would cause the output to be low but the clip light to come on

...clip led light stay on and amplifier is switched on This item is brand new out of the box. There are no input our output connections connected to it. I just took out of the box connected the power ...