Porter Cable C2002 150 Psi 6 Gal Compressor "dewalt compressor building pressure" Questions

...compressor will not shut off on it own. Continues trying to build pressure even after building past 140 psi. I have to turn it off with the switch. the pressure sensor is likely defective. How old is ...

...dewalt D55155 compressor that has not been used in three years. It starts and builds pressure, but does not charge the air hose. Ant thoughts? have you turned up the regulator, the big black know by ...

Dewalt D55168 won't build pressure beyond 125 psi, motor runs continually It has run perfectly for a year and a half. Started it up today and it won't build pressure beyond 125 psi. ...

dewalt compressor builds pressure then pops off at max, never stops running would best guess that the pressure switch is stuck shut. if the pressure is going over 125psi, "and check with a good gauge"

Compressor builds up pressure but does not release suuficient amount of air i would check the regulator and adjust it for more pressure the lovely air regulators on this are very poor. Dewalt and ...

Dewalt Emglo 55168 motor starts to slow down as pressure builds to about 30 PSI. It really starts to labor. Any thoughts as to what could be causing the motor to strain and slow? Most likely in tank ...

...compressor kicks on and builds to max pressure. All air compressors build pressure in the tank(s) to their maximum allowed by the pressure switch. The regulator only controls the pressure of the air ...

...dewalt emglo air compressor has been pumping up and cutting off but can here air escaping in the inside and when it reaches cut-in the motor just hums loud and cuts off until I bleed all air and then ...

dewalt D55146 type 2 air compessor. The motor runs but seems to not build air pressure. Making the motor run continuously. What is making it do this? Check the air pressure regulator. It may be set so

dewalt air compressor d55155 rattles and doesnt build pressure Dear, You required to replace the valves assembly, Cylender and piston also need to check for any damages before ordering parts for ...