Yamaha R-V701 Receiver "speaker set" Questions

...speaker configuration in the setup menu. It should be set to 5.1, if not set it and press enter to save it. If this is setup correctly then try the level settings in your menu. Each speaker has a ...

speaker impedance and the Yamaha RXV 463 I have 2 sets of speakers that I'm wanting to connect to this amp. One set is 4 ohms (old speakers) and one is 8 ohms. Can I do this? The manual indicates that

set-up small speakers S in your speaker settings then it could be that subwoofer is set to yes automatically if you have large speakers L, subwoofer has to be set additionally in the subwoofer setting

...speaker to RXV's Centre out. If it works Speakers are ok. 3) Check RXV - Set it on DTS or Dolby Digital Connect RXV's surround out (one at a time) L and R to the Centre speaker. If there is no sound, ...

...Set-up and Levels adjustments. I've tried different speaker wires. I've tried different speakers. I've tried different video sources (BlueRay & DVD). I've tried ...

...speaker options which allow you to run two sets of speakers. When I had one, one set (A) was used for surround sound, and set (B) by for speakers through out the rest of the house. I am going off ...

...set the volume limit to 79 in the speaker settings. Powering off usually points to issues with speaker setup. You should read pages 42 and 96 of the 606 manual. Page 42 covers impedence settings. ...

...speaker outputs which are not connected. The receiver is set to TAPE MONITOR (if applicable). Turn off TAPE MONITOR mode. Headphones are plugged into the main unit. Unplug the headphones. The source ...

...How can I make the sound from my front speakers louder, relative to my back speakers? Check to see if there is a way to adjust the balance for the speakers or set individual volumes for each

...speaker calibration, you need to set the volumes manually. The best is if the left and right speakers are at the same distance from you (then their volumes can be equal). If one speaker is at more ...