Yamaha RX-V800 Receiver "reciever turns itself" Questions

turns itself off. I checked the reciever itself and does not "smell fried", My dvd changer works ok if not hooked up to the reciever, but when hooked up to the reciever I have to hold the buttons down

Reciever turns itself off Reciever will power up for 1-2 seconds, then turns off. I have diconnected all outputs to check for possible grounding but the reciever still will not power up. try cleaning ...

...reciever turns itself off I have a sony str-dg820. In movie mode, when you turn the volume up, the display says ''protector'' and the reciever turns itself off. The volume level is still low when it ...

...itself. I opened the reciever and cleaned it while i was checking for hardware failures, nut i didn´t find anything weird. Please help. BR. Tomi Karjalainen clean the all push buttons by using ...

reciever for a couple of days, hoping it would reset itself but it did not. The volume is set at 5. Is it repairable or I should buy a new one? thanks, Mirza Power Amp IC gone in your set, replace it.

...reciever and listen for a click-not from the speakers ,fromthe recievers itself.If you hear a click,you can assume that the power supply is ok for that cercuit.This does'nt eliminate the power ...

...reciever just powers off. I can't get no sound to come out of it. For a short time it would play and then when it heats up it shuts itself off now all it does is shuts itself off. Can you please give ...

reciever model AVR 70 four years and when I turn it on the sound goes off or it turns off by itself This sounds like a short circut in the wireing!check back of system to make sure nothing is touching

...itself. Now connect one set of speaker wires at a time. After you connect each one try turning on the reciever until it goes into protection mode again. When it does you will have your culprit. Then ...

...reciever but it worked for me. Good Luck HK protection circuits are complicated. They go into protect for overload, DC detect, and thermal runaway. The protection circuit itself can also fail. It is ...