...2 pre out to a input on the external amp (eg cd input ) never use the phono input this is for turntables,connect this amp to your speaker switch/selector then to speakers. hope this helps cable
...speakers. If you do not visually see a short on the speaker wire connection, turn off the unit and disconnect the wires at the speaker and isolate them so they do not touch then connect the speaker ...
Question about Fisher Audio Players & Recorders
connect speakers to just one channel without connecting speakers to the other channel? Seems like I have heard doing that will do something bad to the unused channel, like burn it out. Yes you can use
Question about Onkyo Audio Players & Recorders
speakers in two of the cabins and it is these I need connection assistance on. How do I best connect these to the amp also. How do I do that without damaging the amp (impedence drop)? Thanks Steve two
...leads from the back of the amp. Not much of a diagram needed. There are left and right + / - speaker terminals on the back of the amp. Run wires from there to the + / - connections on the
...speakers. Does it have 6 channels? if not you may have damaged one of the output amps. When you connect more than one speaker per terminal (in parallel) it lowers the impeadance and the lower the ...
...going thru it. Then connect your speakers to the amp and thats it. Then big issue is getting an audio signal to the amp and the turn on signal for the amp. If you need more help let me know, ...
Question about Yamaha Audio Players & Recorders
...speakers connected to both the Front A L & R and the Surround L & R for now only because i am in the process of getting more. I have my iPod connected through the CD input via RCA to ...
...speakers from the amp and connect to the sub's Speaker Output terminals - and connect a couple of new speaker cables between the sub's Speaker Input terminals and the amp's Main front L and R ...
...connect additional speakers to connections at any time!!!!!!!!!!! ONLY ONE can be applied to EACH OUTPUT TERMINAL!!!!!! If the speakers your using are fuse protected check fuses or circuit breakers ...
19 questions posted
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions