Yamaha HTR-5850 Receiver "powered speakers wont turn" Questions

...wont turn back on, check wiring, plugs and look around, and smell for burnt, or hot components. Does the reciever have separate speaker switches? Try turning off the speakers and turning on the amp. ...

wont stay on Turn on and it powers on then powers off almost immediately. Is there something major wrong or is it just something minimal? most likely something wrong in the amplifier section. Have you

...wont power up to avoid further damage. Visual check by experienced tech is required to fix the issue. Local repair shop will help you for that. Turn the power off the receiver and disconnect the ...

wont turn on just clicks once and nothing. It won't power on and only makes a relay clicking noise. Sounds like faulty psu (pwer suply unit) Amp is going into protection mode. Disconnected all speaker

...wont come back on model number is HT304SU-dh This indicates an output load problem, turn receiver off! remove speaker wires from the back of the unit, power on and turn the volume right down, if the ...

wont go out of it....i even tried it with no speakers connected and it still does it...i think i just blew it... From the manual, you may have seen this: Switch off the unit, determine and correct the

...speakers and it still wont come out of it!!!!!!! Generally speaking, an amp protects itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on. Overloads can be ...

...wont go on I have a Sansui G-5700, I was listening and I turned up the volume a little and it just shut off. I turn the power button back on and it turned on and it did the same thing a couple more ...

...wont turn back on checked fuse its good. power button seems to work clicks when turned on and off If the power to the outlet is still good, then I would suspect the power amp IC or output transistors ...

...wont it turn on? No power, have tried self diagnosis and got nothing. First unplug all cables except power (all speakers and all input) and try to turn the receiver on. Does it do anything? If no ...