RS1000 OLED 2Way OLED Remote Start w 6 Channel Alarm "car starter turn valet mode" Questions

...car starter. sometimes it switches to valet mode. i'm not sure why or how it does this. can someone tell me how to turn valet mode off? i can't seem to place the instruction manual. thank you so much ...

...help me fix this! Turn ignition on, hold the red valet switch down for 2 seconds. Then turn ignition off. Your system is in VALET mode. The remote start and alarm system will not work when in

...car starter problem red light on sensor stays red and does not blink, displayed on windshield. When remote is pushed headlights flash but it does not start the car. led light use to blink and now is ...

...Car. Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will confirm exit. Note: If more than 4 transmitters programmed, the system will only keep the last four. ...

...starter. REMOTE TRANSMITTER PROGRAMMING Enter: 1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds. 2. Push the Valet switch 2 times and hold in on the 2 nd push, ...

...car? You can disable the chirp confirmation by using the following procedure 1. Turn the ignition on 2. Turn the ignition off 3. Press the valet switch 5 times, wait for the Status Light to flash ...

car and see if it starts all the time. If it doesn't start and the little blue light is on solid than we have other problems. Because with the alarm in Valet mode the starter disable feature is turned

...car starter problem i had to unhook my battery, since then it doesn't work...do you know how i can reset my prostart or perhaps it's in "valet" mode? I have a problem my light in the the antana stay ...

...starter.  Simply turn key to IGN position then back to OFF.Push the valet button which is on the antenna next to the led and the led should turn off.Close door on vehicle and lock vehicle.Siren ...

...car--there is no longer a chirp noise that confirms I hit the lock key. Thanks, Mary I don't know which remote starter you have, but I have a Viper 5101. To fix this problem, I started the ...