Question about Viper Vehicle Parts & Accessories
...noise comes back. R, D, 2, L no problem. Only in N or P does it make that noise. The car won't shut off even after turning the key to the Off position. I had to shut the engine by disconnecting the ...
Question about Cavalier Vehicle Parts & Accessories
...noise, just put a new battery in, it starts with a push, once i turn it off again nothing. i even tried to cross jump the starter but it doesnt engage, all it does is spin and make a winding sound. ...
Question about Directed Electronics Vehicle Parts & Accessories
...noise that someone has pushed the button to start it, but no one has. 6 times since last night it has started on its own. what do i do? your system was set by accident for cold weather start, which ...
Question about Viper Vehicle Parts & Accessories
...2 times since and auto start worked fine. Now remote makes buzzing noice and lights on my durango blink 5 times but motor does not turn on.Help please The buzzing noise and lights blinking 5 times is ...
...off either by opening door with the KEY or hitting the car to set off the shock sensor. The 2way remote will start making lots of noise AS THE ALARM IS GOING OFF. Now if you lost the ...
Question about Chevrolet Vehicle Parts & Accessories
...2 wheel drive with a/c auto trans I have replace the fuse three times and all three times it as blown each time i start it and no noise from the starter could it be the ignition switch ? Quick ...
...2 & 3 three more times (A total of 4 times) - each step must be done within 5 seconds of the previous step. 5. Upon the 4th turning of the key to "ON", press the lock button on one remote, the locks ...
Question about Viper Vehicle Parts & Accessories
when I try to use my automatic start on my viper sst my car wont start up. If I try to use the automatic start without putting the key in the ignition, my car keeps making a grinding noise like it is ...
My Viper 5701 has been flawless but now on locking/unlocking the car no longer "chirps." Everything else still works perfectly such as the flashing lights. The remote also has changed its noise from ...
2 12V inputs, so I hooked one up to the main ignition harness and another to another 12v constant that I have found. When I put the inline fuses in, the control module makes a whining sound and when I
12 questions posted
Usually answered in minutes!
218 Questions
215 Questions
39 Questions