Toshiba E-STUDIO 650 Copier "paper try printer wont catch" Questions

...fit to the paper feeder. 3. Reload paper and try printing. If all of those steps above wont resolved that issue, your printer is needed to send to the nearest service center in your area. --->> ...

...around with that. It might help to understand if you take the back off the printer and get a flash light and try to print a photo, you will see the paper tray slide in and see it feed. hope this ...

...paper tray seems to be about 1/16 inch low with one sheet on it. i am thinking of getting into the cabnet and putting a spring under the tray. since the thing is obsolete,i request down loading a ...

...try and feed paper through, it gets snagged against a plastic thing at the back. i can see the obstruction, it looks like some sort of black spacer, possibly used for adjusting for paper thicknesses, ...

...try to catch on the paper level sensor tab and pulled it out of place. Since this was out of place when the printer lifted the paper, the printer did not know that the paper was up and would keep ...

...try. My first attempt found it a bit too restrictive and feeded to sheets at a time but adjusted it once and its back to normal. I know its a bodge but its a cheap one and it uses a rubber band, just ...

...paper catch. Try to print the job one more time. If these steps resolved the issue , there is no need to continue troubleshooting. If the issue persists , see the next step. Step three: Choose the ...

...the cartridges and load some paper. Try to print a document again to verify that the problem is fixed. If problem continues, please contact Lexmark Technical Support Center for additional

...paper up but it just wont 'catch' it and then the printer times out and the standby button flashes red. This has happened ever since I got new photo paper for it but it is exactly the same paper! i ...

...paper out of the printer in to the recieving bin spin, but no paper goes through the printer. Thanks. Its caused by the rubber on the feeder wheels getting worn. And the fix is easy. Just peel the ...