Toshiba E-STUDIO 650 Copier "hdd firmware update" Questions

do we remove the hard drive from the Toshiba EStudio 65 copier? Open up the back cover, then u will see the HDD drive. After install new HDD, u need to update firmwares. how do you update the firmware

452 HDD mount failed If u install new HDD, u need to make partition (3+CLEAR), update firmware (4+9), initialize updating data (08-947), format HDD (08-690)

...memory/HDD adjust, HDD Version upgraded. Firmware on the control board/image control board not matching data on the Hard drive. per the service manual, if not that bad control/image control ...

error code F10 can you tell me what this means Thank you [F10] HDD Initialization error What u can do: 1. Format HDD. 08-690 "2" 2. Replace new HDD, update firmware.

F 1014 error code in toshiba eStudio 256se F101_4 error is due to HDD. U can format the HDD and update firmware if HDD no damage.

...bad sector check (08-694). If the check result is OK, recover t he data in the HDD. If the check result is failed, replace the HDD. (4) Replace the SYS board. U need to update firmware if replace ...

Firmware Version Up Mode" appears on the LCD, key in [3] and press the [START] button. 2) Format the HDD. (Setting Mode (08-690: 2)) 3) Update with the download jig or USB storage. 4) Format the HDD.

why is toshiba estudio estudio350 staying in. warm up Possibly bad hard drive. You can try HDD format first. If you replace the HDD, you will need to update the firmware.

...FIRMWARE "The HDD Version Up procedure has not been completed" IF NOT DURING FIRWARE UPDATE YOU NEED TO "PROPERLY"UPDATE TO NEWEST FIRMWARE, MAKE SURE YOU READ PDF THAT COMES WITH FIRMWARE ESPECIALY ...