...sorter to reset the code. By open and then close I mean that the sorter must be pulled away from the copier then closed back. Make sure there is nothing interfering with the movement of the sorter ...
...code -- lost communication with the sorter. Are there secondary numbers after the F1? Check connector cables on sorter and machine, check power to sorter. If those are fine then you are looking at a ...
...ask u for give me manual for solution all code for ricoh 1232c ... thx E721 Sorter stapler bin lift sensor E722 Sorter stapler jogger sensor E723 Sorter stapler grip sensor E792 Sorter stapler ...
sorter it displays error code sc726. I have unplugged the sorter and the errors go away. How would I either access the sensor to clean it or remove the sorter completly? FYI - I do not need the sorter
...on and off the machine and it will automatic reset the error code but make sure that the sorter motor will works ok! Christopher I just picked up a Canon NP6545. What is error code E524? How do I
...the number are sorter error codes. You must open then close the sorter in order to clear this code. By opening and closing I mean you need to pull the sorter away from the copier then close it
Question about Sharp Office Equipment & Supplies
off and check th connecter . Sub code 00: Communication error between main board and sorter. 01: Jogger error. 02: Sorter transport motor drive. 04: Sorter bin sensor problem. Lower limit sensed wrong
...code means, thanks If your machine has a sorter it may be caused by the wiring harness that goes to the sorter from the machine being pinched. Try powering down the machine and unplugging the sorter ...
...code deals with the sorter. Are the bins moving at all, also try to unjam the stapler. Also have you tried to let the machine warm up with the sorter moved away from the copier? How about this have ...
Question about Minolta Office Equipment & Supplies
...code return immediately there is a malfunction in the sorter and it will need service. Or if you do not use the sorter it can be removed in order to at least restore the copier to working condition. ...
523 questions posted
Usually answered in minutes!
267 Questions
218 Questions
181 Questions
164 Questions
139 Questions