it is on the left-hand side of the machine
close to the back. It is a square shaped cover with one screw holding it. when you unscrew the the cover the screw doesn't come
more...
The Toner sensor inside the imaging unit may be giving an incoorect reading, due to be faulty or because of old toner/carrier mix blockage
close to sensor. Give the imaging unit a good service and replace the carrier. 3) The wires behind the black cover of the imaging unit
more...
staples jammed in the unit, take the staple cartridge out, release the leaver on the staple cartridge and remove the first sheet of staples,
close up the leaver, and reinsert in the copier. then try to staple again
more...
need and cables to connect it as all the connections are internal. does the gl1010 light up and does the cd rom open and
close when you turn the copier on?
more...
sharp 1631 when I
close the side door where the rollers are the machine want to start but only for a split second. I found some pcs. of black
more...
the Canon D680. Some how it got some paper stuck right in the middle and I can't take it out and the ADF won't
close more...
it clears. When it is the fuse the unit does not start at all (no light), try the unplugging, open all doors and
close them back, after power surge some of the sensor can be stuck on error message. If it does not clear the error you need
more...
Sponsored Links