Question about Car Audio & Video
I have a ph30.2 power plate. I want to know how to install it right 1.Cut the appropriate size hole. 2. be sure the amp supports your sub with the proper impedance. 3.wire the plate to the sub 4. ...
2 crome plates that have these little crome wires coming from underneath of em to the board are burnt! I have an MTX 1501d Thunder and these are the crome plates that look screwed down on both sides ...
...Not installed.] There are two black wires on the left side of the case. One is soldered to a copper plate on the case, which also has a bare copper wire going to a copper coil.. The other goes to ...
amp a2801q i want to know how many watts does the audiobahn a2801q have? Audiobahn A2801Q Product Description: Class A/B MOSFET Circuitry 200 watts x 2 @ 4 ohms stereo 280 watts x 2 @ 2 ohms stereo ...
...you! it sounds like you are asking for the transistors that are soldered to the "mesha" heatsink plate. you call rockford at 800-366-2349 and ask for their parts dept. which will be your only ...
...have owners manual or the code to unlock. Help! There is a reset button on the front of the face plate buy the buttons for changeing your radio sations.It is right beside the last button on the ...
theres no reset button on back of the amp or underneath the back plate, what should i do now??? Check the 'plug in fuse' near the input sockets.
Question about Washburn Car Audio & Video
...through the amp, but the amp works ok probably have active pickups on the guitar. if there's a plate on the back, get a small phillips screwdriver, take the plate off, and put a new 9 volt ...
Question about Car Audio & Video
clutch on my orion 250 dirt bike is rattleing and vibrating badly and the clutch seems to drag, how do i get the clutch basket off, do i need a puller? is it the clutch bearing as the bike has only ...
1 questions posted
Usually answered in minutes!
18 Questions
17 Questions
13 Questions
12 Questions