Toshiba TDP T1 Multimedia Projector "trouble shooting" Questions

Trouble shooting of projector cp-sx635- when ON/OFF sw of the projector put to ON, LED of power (ON/OFF) sw glows green. After few seconds, both Power LED and Lamp LED starts glow RED. (2) The exhaust

t project picture when I press the power button an orange light blinks. I can't get it to project a picture. First check your manual for trouble shooting the lights meaning. I think it is the bulb

...and also from this site which can be used for trouble shooting too: http://www.projectorcentral.com/Radio_Shack-Cinego_D-1000.htm. Hope this ...

...trouble shooting in Benq MP611 DLP model projector... Lamp color light is turned to yellow from origin blue color... i need to back for blue color... kindly post ur answer to this or ...

...trouble shooting tried factory reset. Now in addition to having only 5 minutes of projector time our image is upside down! Help! It sounds like the dc power supply on the projector has gone out, I ...

...trouble shooting guide and it has listed that the Power Diode failed.Is that something that I can replace or does it need to be sent in? if you're good at soldering, then yes. could also be that the ...

How do you trouble shoot a Viewsonic DLP Projector? It depends what the issue is. There are too many options to expect someone to list on a blind query like this. Maybe if you'd been a bit more ...

...lights come on green then they go out and the standby light turns red. Nothing works after that. Any thoughts on trouble shooting? Thanks in advance. Make sure it is clean and not clogged with

...smell of smoke/burning. Its more than likely a compasitor, and unless you know how to electrical trouble shoot, and sodlier then you will need a new one. We call if magic smoke in the electrical ...

how do i get the case open - fan quit -need to trouble shoot turn unit upside down on the bench with the power disconnected. undo screws around edge. flip unit over and lift cover off. unplug cables ...