fan failure erratic when you start it up sometimes it will work fine then sometimes it will shut down and say fan failure and the fan does stop turning Lubeor replace the fan.If you cannot do this, ...
Question about Toshiba Office Equipment & Supplies
...fan failure fan failure http://www.givemefile.net/smanuals/projectors_home_entertainment/toshiba/file/31174.html There is a service manual, use the troubleshooting procedures, and you should be able ...
Question about Optoma Office Equipment & Supplies
...fan failure in my optoma hd 80 home theater projector, is it fixable, needs a replacement fan, etc.? first vac and clean vents for proper air flow if still coding with unit unplugged remove cover and ...
Question about InFocus Office Equipment & Supplies
...cause premature lamp and projector failure. the fan has 3 wires- ground, power and sensor. if the fan spins too slow or not at all, the projector will shut down to prevent damage. so, replace the
fan failure issue on 7200 Fan failure 4 blinking lights on mine as well. Interesting though, It's only with the HD output from my cable box. My Blu-Ray movies play just fine in HD with no fan failure.
Question about Sharp Office Equipment & Supplies
...no fan Please check the filter door switch or if the fan as if the fan does not work there is an error and so the lamp will not be powered.Check the power to the fan motor, check the lamp for
Question about NEC Office Equipment & Supplies
fan, inside temperature etc. It seems that your projector lamp turns ON & then OFF. If the lamp turns ON then lamp is OK. Remove dust from the dust filters if they are blocked. There are many fans
...fan failure. check fans are spinning when pj is switched on. This is a very common problem with these projectors. The fans slow and then lock up and the units are out of warrenty. The fan you replace ...
Question about Relisys Office Equipment & Supplies
fan failure any ideas on how to fix this problem Yes. You will have to find out which of the many fans has failed. I reckon it will be the fan neaest the lamp. Clean the air ways and repair or replace
The message on the projector says ''fan failure'' You have a problem with your fan/s, it will not start so it has either got a fault with it or the sencor has been knocked.
11 questions posted
Usually answered in minutes!
401 Questions
267 Questions
218 Questions
181 Questions
164 Questions