...seal plate You may need a seal plate o-ring or you may have a shaft seal leak. See if you can determine if there is water running down the outside of the seal plate from where the motor mates to the ...
...seal plate and pump/strainer housing I have a Hayward Super Pump II that is leaking. It is leaking between the seal plate and the pump/strainer housing.I have replaced the housing gasket but it still ...
pump may leak. The discharge fitting, the seal plate o-ring, or the shaft seal. If the shaft seal is leaking, water will be dripping from the bottom of the pump where the motor mates to the seal plate
...seal plate o-ring). When you replaced the motor you should have also replaced the shaft seal. If not go back and do that whether it's leaking or not. If you get your head down and look at the bottom ...
...Seal Plate. I replaced the Seal Plate O-Ring, Diffuser O-Ring, Impeller Ring, and Seal Assembly but it continues to leak. I used silcone on all O-Rings as recommended by the parts dealer. Any ...
pool technician or have changed out the seal. 1) Make sure breaker/power to pump is off. 2) Remove the six bolts holding the wet end to the seal plate. 3) Remove the diffuser to expose the impeller. 4
...as we speak. Did you change the seals? Whenever pump motors are replaced, the ceramic shaft (mechanical) seal should be replaced. Its also a good idea to replace the seal plate and diffuser
Question about Hayward Pool & Spa
...seal plate at the bottom. They replaced shaft seal but it is still leaking. I notice from the STA-RITE installation guide that the copper insert(cone shaped) should be replaced.I was told that this ...
pool pump was leaking from underneath. I replaced the difuser as I thought that was cracked however it is still leaking. I'm thinking something inside the motor itself is cracked (seal is fine
5 questions posted
Usually answered in minutes!
337 Questions
104 Questions
92 Questions
